DIY: Will you be my bridesmaid card

How I Did It

Materials (per set)
1 80lb (or heavier) coverstock 8.5×11
belly wrap or 1 36lb (or close) vellum 8.5×11 – creates 5 belly wraps
1 envelope A2 (4 3/8″ x 5 3/4″)

For stores, click here

Tools
cutter, X-acto knife (to cut inner rectangles), adhesive, computer, printer

Recommended
Rotary Paper Trimmer (cutter), X-Acto Knife, Classic Crest Solar White 80lb (paper), Classic Crest Recycled Bright White 80lb (recycled paper)

Fonts Used
Sloop Script Two, AvantGarde Gothic

Template
The card measures 4″ x 5.5″ and contains 4 pieces wrapped together with the belly wrap.

Click image below to download template

Directions
Print and cut on solid lines.  Assemble with top-left card at the top, then the top-right card right below, then the bottom-left card, then the bottom-right card at the very bottom.  Wrap them together with the belly wrap.

If you want a crisper image (bridesmaid), print this file first on paper that you plan to use for your card.  Personalize this 2nd file, then print it using the paper you’ve printed the first file on.  Make sure you print on the side  where the image is printed.

Insert assembled card into envelope and you’re all set!